Automotive Window Tint – 50 Tint Automotive Window Tint - 50 Tint

50 Tint
If you’re not observing for darkness, then a 50% tint is a great option for you. It simply blocks half of the light from coming into your car but is still effective for observance of heat and UV rays. It also helps to reduce glare and eye strain, which makes driving much safer.

If your vehicle didn’t come with window tint, or you think you might want a darker or lighter shade, it pays to learn about your options before you commit. There are many different window tint percentages and types of window tint. If you don’t choose the right one, you might not get the protection and overall experience you desire.

Don’t worry, although, this guide to car window tint percentages will tell you everything you essential to know!

Window Tint Percentages: Understand Your Options!

When it comes to auto window tinting, you have a wide array of options ranging from 5% to 90%. The percentages refer to visible light transmission (VLT), which is the amount of visible light that can come through the windows. So this means that the lower the percentage, the darker the tint will be.

Here’s a look at a few of the most common window tints and some pros and cons.

Thirty-Five Percent Tint

A vehicle with a 35% tint will give you a darker, more appearance but is still very easy to see through. Many people like this tint because it makes a smooth, stylish look.

Twenty-Percent Tint

If you’re concerned about privacy, you may want a 20% tint. Although you can see through it from the outside if you’re up close, it’s difficult. This is enough to deter most casual snoops and would-be criminals.

Most vehicles that come with “built-in” factory tint is in the 15-20% range.

Five Percent Tint

A 5% tint is extremely dark, and you can’t see through it at all. This is almost state but is most commonly used on the back windows of limousines.

Calculating VLT

While this might seem pretty simple, there’s one more thing to consider. Most vehicles don’t come from the factory with completely clear glass. They almost all have a VLT of about 80%. So you need to consider this when calculating how much light comes through.

For example, if you were going to apply a 5% tint to glass that already had an 80% tint, then you would need to multiply the two (5% x 80% = 4%). This means that the vehicle would have a combined VLT of 4%.

If this is overwhelming, don’t worry – most window film specialists can determine the percentage of your tinted car windows within a close range just by looking at it. This comes from years of experience. To find out for sure, though, you’ll just have them measure it with a tool that’s similar to the one police use.

This will give you an extremely accurate reading that you can count on.

Common Definitions

Before you order window tint, it’s a good idea to understand some terms you might hear, and window tinting common practices.

First, when referring to the “front-side windows”, this includes the passenger and driver’s side window, but not the windshield. The “rear-side windows” are any side windows that are behind the front-side windows. Although your windshield won’t be tinted, there is a shade band, which is a film that comes down from the top of your windshield.

The term “tint reflection” is a term that’s used when discussing reflective window films, most often metallic films. You may also hear the term “restricted colors” which means that color tints aren’t legal in the state.

Window Tint Laws

Window Tint Laws

When deciding which car window tint percentage is best for you, you’ll want to consider the laws in your local area. Each state and county has its own rules about the maximum percentage that’s allowed for tinted windows.

In Illinois, for example, the rules are different for cars vs. SUVs and vans. On cars, the front, back, and rear windows must allow more than 35% of light in. In SUVs and vans, the front-side windows must allow in more than 50% of light, and any darkness can be used on the back-side windows and rear windows.

There are other, more complex, laws in the state, including:

If the front-side windows stay tinted, then any windows behind the driver can legally have any tint percentage.

If no window behind the driver is tinted below 30% VLT then the front-sider windows can have 50% light transmission.

If vehicles have a factory-installed tint on any back window, then the front-side windows must have over 50% VLT. This is true, no problem how light or dark the tint is on the back windows.

Since the rules are so complicated, it’s a good idea to consult with a professional before choosing your tint. This will increase the chances that you’ll get exactly the look and benefits you’re looking for while remaining on the right side of the law.

Choose Xtreme Auto Glass & Window Tint for Your Window Tinting Needs

Most people don’t realize just how complicated window tinting can be. Luckily, if you work with a trusted professional, you don’t need to be an expert in window tint percentages.

Does 50 Tint Make A Difference?

Does 50 Tint Make A Difference?


Car Tint Percentage Options

A 50% tint is a great option if you don’t want whole darkness on your windows. It’ll only block half the light coming into your vehicle, but it still blocks out UV rays and heat. Plus, it’ll still reduce eye strain and glare, which creates safer driving.

Which Tint Percentage Is Best?

A car window tint percentage of 50% is effective in keeping out UV rays and heat. It blocks half of the light, thus decreasing glare and eye strain. If you’re looking for a stylish and smooth look for your mobile car, the best window tint percentage is 35%. It gives off a darker appearance without sacrificing visibility.

What type of Car Tint Is Best?

If you’re looking for the-of-ththeine UV heat protection, carbon or infrared rejection films are your best choice. These films block the infrared rays responsible for the greenhouse effect inside your car significantly more than other films on the market. Like ceramic films, they contain no metal.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top